cree mt-g2 series features a pplications > cree easywhite color temp from 2700k to 5000k > directional > 85c binning and characterization > downlight > ul- recognized component (e349212) > electrically neutral thermal path flux characteristics @ 85c color cct (typ.) kit used warm white 2700k j027f neutral white 5000k n050f characteristics unit minimum typical maximum viewing angle (fwhm) degrees 115 effective thermal resistance, junction to solder point c/w 1.5 esd classification (hbm per mil-std-883d) class 2 led junction temperature c 150 dc forward current (6v) ma 3000 dc forward current (9v) ma 2000 dc forward current (36v) ma 500 forward voltage (6v, 1000 ma, 85 c) v 5.7 forward voltage (6v, 1000 ma, 25 c) v 7 forward voltage (9v, 735 ma, 85 c) v 8.55 forward voltage (9v, 735 ma, 25 c) v 10.5 forward voltage (36v, 185 ma, 85 c) v 34.2 forward voltage (36v, 185 ma, 25 c) v 42 temperature coefficient of voltage (6v) mv/c -4 temperature coefficient of voltage (9v) mv/c -6 temperature coefficient of voltage (36v) mv/c -26 reverse voltage v -5 reverse current a 0.1 it is highly recommended for the user to review the cree series page for additional and most recent technical data at: http://www.cree.com/led-components-and-modules/products/xlamp/arrays-directional/xlamp-mtg2-easywhite cree mt-g2 series on board min.flux (lm) @350ma 600 750 the first easywhite led array built on the sc3 technology platform, cree's xlamp mt-g2 led pushes performance limits to redefine lumen levels and efficacy while delivering the industry?s best color consistency and superior optical control. the mt- g2 led delivers up to 1987 lumens in cool white and 1735 lumens in warm white, both at 18.5 watts, 85c. global headquarters, 3 northway lane north, latham, ny 12110, usa www.marktechopto.com toll free: 1-800-984-5337 ? phone: 518-956-2980 ? fax: 518-785-4725 ? email: info@marktechopto.com
hardware (not included) > mount with #4 machine screws. > 16awg maximum wire gauge. > use only with constant current power supplies. pcb fabrication > layer count: 1 > core material: 6061-t6 aluminum > single layer copper weight: 1oz > solder mask: white > finishing plating: pb free hasl * exceeding maximum ratings may damage the led and cause potential safety hazards. * elevated operating temperatures can be expected to negatively impact the service life (lumen output) * all data is related to entire assembly. data reflects statistical mean values. actual data may differ depending on variances in the manufacturing process. * end users need to take into account the lumen depreciation as the temperature rises with various thermal solutions installed. note 1: using continuously under elevated loads (i.e. the application of high temperature/current/voltage or a significant change in temperature, etc.) may cause this product to significantly decrease in reliability even if the operating conditions are within the absolute maximum ratings. note 2: the thermal resistance from the led junction to ambient temperature, rth(j-a), should be kept below 10c/w so that the led is not exposed to a condition beyond the absolute maximum ratings. note 3: the temperature of the led assembly must be measured at the tc-point according to en60598-1 in a thermally constant status with a temperature sensor or a temperature sensitive label. cree mt-g2 series on board global headquarters, 3 northway lane north, latham, ny 12110, usa www.marktechopto.com toll free: 1-800-984-5337 ? phone: 518-956-2980 ? fax: 518-785-4725 ? email: info@marktechopto.com
|
